Filter
Top Products
4
U.L. Model No.: CF905
How to Put Your Ceiling Fan Together (pages 9 & 10)
1. Remove the 10-24 x 3/8” pan head screw with lockwasher
nearest the hook from the ceiling mounting plate and retain for
later use. Loosen the remaining two 10-24 x 3/8” pan head
screws several turns.
2. While still attached to the mounting plate hook, pivot the fan
motor assembly upwards and mate it up against the ceiling
mounting plate. Align and engage the two keyhole slots with
the two loosened screw heads.
3. Securely tighten both 10-24 x 3/8” pan head screws.
4. Reinstall the previously removed 10-24 x 3/8” pan head screw
with lock washer to lock the motor assembly onto the ceiling
mounting plate.
5. Loosen two opposing 10-24 x 3/8” pan head screws and
remove the remaining two 10-24 x 3/8” pan head screws from
the outer rim of the ceiling mounting plate.
6. Slide the fan housing trim ring over the fan housing cover.
7. Position the fan housing cover over the fan motor assembly,
align and rotate the housing to engage the two loosened 10-24
x 3/8” pan head screw heads in the ceiling mounting plate.
Securely tighten both screws.
8. Reinstall the previously removed 10-24 x 3/8” pan head screws
to lock the housing cover onto the ceiling mounting plate.
9. Push the trim ring upwards and rotate so that it engages and
locks onto the four mounting screw heads of the fan housing
cover.
10. Mount the blade flanges to the fan blades using three 10-24 x
5/16” washer head blade screws per blade (supplied). Repeat
for the four remaining blades.
FAN MOTOR
ASSEMBLY
KEY HOLE SLOT
10-24 x 3/8" PAN
HEAD SCREW WITH
LOCKWASHER (3)
FAN HOUSING
COVER
FAN CEILING
MOUNTING PLATE
REINSTALL THE
TWO PREVIOUSLY
REMOVED 10-24 x
3/8" PAN HEAD
SCREWS
TIGHTEN TWO OPPOSING 10-24 x 3/8"
PAN HEAD SCREWS
CEILING
TRIM RING
FAN
HOUSING
COVER
MOUNTING
SCREW HEADS
FAN BLADE
10-24 x 5/16" WASHER
HEAD BLADE SCREW (3)
BLADE FLANGE
EMERSON QUICK START GUIDE