Filter
Top Products
CA-3000, CA-3200
F
RONT PANEL
C ONTROLS
1. Manual/Auto: Changes the cycling mechanism to either manual or auto-
matic mode.
2. Inhale: Sets time interval (sec) for Inhale phase of automatic cycling.
Not operative in the manual mode.
3. Exhale: Sets time interval (sec) for Exhale phase of automatic cycling.
Not operative in the manual mode.
4. Pause: Sets time interval (sec) for Pause phase of automatic cycling.
Not operative in the manual mode.
5. Power: The power switch turns on or off the CoughAssist MI-E. The “I” symbol on the
switch designates the on position. When activated a green light within the switch will
illuminate. The “O” symbol designates the off position.
6. Manual Control Lever: Use to manually cycle the unit to inhale or exhale. Not operative
in the automatic mode.
7. Pressure: Varies the inhalation and exhalation pressures together (also see Inhale Pressure).
8. Handle: Recessed carrying handle.
9. Patient Port: Connection for patient circuit.
10. : Symbol for Type B Equipment with F-Type applied part.
11. Inhale Flow: There are two inhalation flow settings: Full ( ) and Reduced ( ).
NOTE: When using reduced inhalation flow there will be a small reduction in inhale pressure.
12. Inhale Pressure: Varies the inhalation pressure between 50% and 100% of the
exhale pressure.
13. Pressure Gauge Zero Adjust: Access to “zero” adjustment on the pressure gauge.
Use only if the gauge does not return to “O” when the unit is turned off (see Section 8).
14. Pressure Gauge: Indicates pressure in the patient circuit calibrated in cm H
2
O.
SECTION 4
7
CONTROLS
, CONNECTORS & VISUAL INDICATORS
o