Filter
Top Products
3
5. Pull out the cable and plug it into the power
outlet. Remove the plug from the power outlet
by the plug not by the cable. When activating the
rewind pedal, guide the cable into the cleaner
with your hand to prevent it from whipping.
it from whipping.
6. Press the On / Off pedal with your hand to start
and stop the vacuum cleaner.
7. Adjust the suction power using the variable
power control knob on the vacuum cleaner or
the suction control on the hose bent end handle.
GETTING THE BEST RESULTS
Hard Floors
Use the dual purpose floor nozzle with the
pedal as shown.
BEFORE STARTING
1. Open the dust bag compartment lid.
2. Check that the dust bag is in place.
3. Insert the hose until the catch clicks to engage.
Grip the hose connection and press the catches
to disengage for removal.
4. Attach the extension tube to the bent end hose
handle and the floor nozzle.
|
ASSEMBLING THE VACUUM CLEANER
33343 IFU_U3701-U3702_V7.indd 3 19/9/07 10:36:41 AM