Filter
Top Products
Elation Lighting www.elationlighting.com 24
Channel
Function
Time and Value
DMX
HEX
%
lying eight
size / phase see also PAN
192..22
3
C0..DF
76..87
random movement
size see also PAN
224..25
5
E0..FF
88..100
Pan/Tilt relative movement
0..01
00..01
0..1
15) Speed
Pan/Tilt
Pan/Tilt slow – fast
Use this channel 14) also for the
speed of the movements (channel
13).
Pan Min. 530° = 200 s
Pan Max. 530° = 2.65
s
Tilt Min. 285° = 110 s
Tilt Max. 285° = 1.8 s
02..255
02..FF
2..100
Lampe ON
Shutter open
254..25
5
FE..FF
99..100
Lampe OFF
Channel 9 ( min. 3 sec. ) (only if
shutter is closed, channel 9 = 0 ..15)
230..24
9
E6..F9
92..97
*) Set the function “FCOL” ‘ON’ if you want to control the color wheel continuously.
5 Change the Lamp
For a frictionless operation pleas read this chapter carefully and follow all instructions.
5.1 Safety Regulations
• Pull out the main plug!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Don’t touch the bulb of the lamp with bare fingers (this can cause damages).
• Before you put the POWER WASH 575E
POWER WASH 575E
into operation close the casing,
otherwise your retina can be hurt!
5.2 Realize the Lamp Change
1. Pull out the main plug!
2. The lamp can be changed in a very comfortable way directly from the
backside of the case without opening the head.
3. Open the four recessed head screws (1, 2, 3 and 4) of the backside lamp
sheet and remove it carefully.
4. Remove the old or broken lamp by opening the two sidewise lamp screws.
Attention: The glass bulb of the lamp can splinter. For that reason remove
the lamp with safety gloves or some cloth.
5. Put in the new lamp securely with a tight fit into the socket and close the two