Filter
Top Products
12
ASSEMBLY
WARNING DANGER
Never perform maintenance or assembly procedures with engine
running or serious personal injury may result.
BLOWER APPLICATION
Install Blower Pipes
1. Align grooves in straight pipe with pegs on blower housing and
slide pipe onto housing.
2. Turn straight pipe clockwise to lock it into place.
3. Align grooves in fan head nozzle with pegs on straight pipe and
slide fan head nozzle onto straight pipe.
4. Turn fan head nozzle clockwise to lock it into place.
VACUUM/SHREDDING APPLICATION
Install Vacuum Tube and Bag Assembly
IMPORTANT
Never operate unit without either housing cover or vacuum tube
installed securely on unit.
1. Turn knob (A) counter clockwise until hinged housing cover is
free to open for vacuum tube installation.
2. While holding housing cover open, install vacuum tube into
blower housing with bevel end facing downward. Vacuum tube
will activate safety interlock switch (B) when housing cover is
open.
3. Secure vacuum tube with clamp (C).
NOTE
Clamp fits under slotted guides (D).
C
B
A
D