Filter
Top Products
CAUTION
• Turn power off and unplug
before checking for
blockages. Failure to do
so could result in electric
shock or personal injury.
• If any part of your
machine becomes
blocked, it may overheat
and then automatically
shut off. Unplug machine
and leave to cool down for
at least 60 minutes before
clearing the blockage.
• For safety, please lay the
machine on its side before
checking for blockages.
• Please note: clearing
blockages is not covered
by your machine’s limited
warranty.
• Beware of sharp objects
when clearing blockages.
• Refit all parts of the
machine securely before
using it.
Check to see if tools, wand, and hose are clear
of blockages.
A To remove the hose, rotate base of hose downwards
until it clicks, then pull away from the machine.
B Squeeze release buttons to remove the airway
inspection and check inside.
C Pull the top end of the tube away from machine
and check inside.
D Undo soleplate fasteners
with a coin.
E Rotate endcaps and remove.
F Pull out brushbar sections.
G Cut out debris, avoiding
bristles.
tip When replacing the
brushbars, insert them
so the ends with the
silver pin are facing
outside of the vacuum.
8 Clearing blockages
A
E
G
F
B
C
D