Filter
Top Products
22
8. Next, slide the storm collar down the chimney until it contacts the flashing. Tighten
the nut and bolt and seal the collar to the chimney with a waterproof, non-
combustible silicone sealant. Finally, twist on your rain cap and you can head back
inside. If the chimney extends more than 5 feet above the roof deck, roof guys
with telescoping legs and draw bands are required.
9. You are now ready to connect your chimney to your stove. Simply install the inter-
connecting stove pipe between the stove pipe adapter and the stove. You can
follow the instructions in the following section (section 2.3) of this manual called
« CHIMNEY CONNECTOR».