Filter
Top Products
15
Stove pipe
An adequate number of stove pipe sections.
A 90
o
elbow
Typical installation through the wall
FIGURE 2.2.1 (A) Typical installation through the wall
1- Start by positioning your stove where you would like it to go, taking into account
the minimum clearances to combustible material. You will then be able to
determine where the chimney will pass through the wall. You will probably have to
adjust the stove position slightly to ensure that your chimney will run between the
studs. You can use a stud finder to locate the studs. Use a spoke saw or jig saw to
cut a hole, remembering that you need to maintain a clearance of 2 inches
between the chimney and any combustible materials. For concrete walls, cut a
hole slightly larger than the outer diameter of the chimney.