Filter
Top Products
14
FIGURE 2.2 Minimum Height of the Chimney
2.2.1 Step by step installation of your factory-built chimney
The way to install your chimney may vary from one chimney manufacturer to another. The
instructions contained in this manual are based on the recommendations of chimney
manufacturers whose products are sold at many North American retailers of wood stoves
and related heating accessories.
Wall support system
If your chimney must rise along an outside wall, you need to connect it to your stove
through an adjacent wall. In Canada the CSA B365 and the CSA C22.1 installation codes
are to be followed. For this type of installation, the following items are normally required:
Chimney
Suitable lengths of chimney (enough to go up to your roof)
An adjustable wall support
A wall thimble
An adequate number of wall bands (one for every 8 feet of chimney, excluding the
roof portion)
A stove pipe adapter
One insulated tee & plug
A roof flashing kit (if necessary)
A chimney cap.
Roof guys (if required)