Filter
Top Products
33
Dometic CA1000 Installation
7.3.5 Menu level 4: Space factor
The space factor (03 to 20) affects the power levels of the compressor
and fan in automatic mode. If the space to be cooled is very large, select
a higher space factor:
➤ Start configuration mode (see chapter “Start and end configuration
mode” on page 31).
✓ The first digit of the display (fig. e 5
,
page 6) shows the menu level
and the second and third show the parameter which can be set.
➤ Press the
+
button (
fig. e
6,
page 6
) three times to switch to menu
level
4
.
➤ Press the Mode button (fig. e 4
,
page 6) to change the parameter.
✓ The digits in the display flash until the parameter you enter is con-
firmed.
➤ Use the +
and
–
buttons (
fig. e
6 and 7,
page 6
)
to select the temper-
ature (in °C) with which the system starts.
➤ Press the Mode button (fig. e 4
,
page 6) to confirm your entry.
✓ The set value is saved and is then used when the system is restarted.
✓ You are now in menu level 4 and can use the +
and
–
buttons
to switch
between menu levels.
7.3.6 Menu level 5: Default setting
You can return the parameters you set in configuration mode on menu
levels 1 to 4 to the default settings:
➤ Start configuration mode (see chapter “Start and end configuration
mode” on page 31).
✓ The first digit of the display (fig. e 5
,
page 6) shows the menu level
and the second and third show the parameter which can be set.
➤ Press the
+
button (
fig. e
6,
page 6
) four times to switch to menu
level
5
.
✓ The digital display shows 00.
➤ Press the Mode button (fig. e 4
,
page 6) to return the system to its
default settings.
✓ The digits in the display 00 flash.
➤ Press the
+
button.
✓ The digital display shows 01.
➤ Press the Mode button (fig. e 4
,
page 6) to confirm your entry.
✓
The parameters set in configuration mode are returned to the default setting.
✓ You are now in menu level 5 and can use the + and – buttons to switch
between menu levels.
_IA_CA1000.book Seite 33 Freitag, 30. Januar 2009 11:12 11