Filter
Top Products
26
3 Operating
Switching off and retracting the power cable
3.2 Switching off and
retracting the power
cable
1. Switch off the cylinder vacuum cleaner using the on/off
switch (Fig. 14/1) and pull the plug out of the socket.
2. Take the plug in your hand and hold it firmly.
3. Press the cable retract button (Fig. 14/2) to pull in the
power cable. Guide the last part with the plug by hand.
3.3 Storage When putting the vaccum cleaner away or during work
breaks, you can use the stow-away hook mount (Fig. 15/1)
on the underside of the cylinder vacuum cleaner. This is
where you can hook the stow-away hook (Fig. 15/2) onto
the telescopic tube.
If you want to store the appliance for a longer period of
time, empty the dust container and clean it as well as the
filters. Store the appliance in a cool, dry room.
3.4 Emptying the dust
container
Empty the dust container at the latest when the "Max"
mark (Fig. 16) has been reached or when it is losing suction
power.
WARNING:
The power cable can whip around when being pulled in,
it can also trip you or somebody else up or knock down
objects.
Fig.14
2
1
WARNING:
If you leave your work area, switch off the appliance and
observe the instructions under ZChapter 3.2, "Switching
off and retracting the power cable". This will help avoid
accidents.
ATTENTION:
Never position the appliance directly against heat
sources (e.g. heating, oven). Avoid direct sunlight. Heat
can damage the appliance.
Fig.15
2
1
ATTENTION:
Before you empty the dust container, switch off the
appliance and observe the instructions under ZChapter
3.2, "Switching off and retracting the power cable". In this
way, you will prevent the dust from destroying the
appliance.
Fig.16
02Centrixx_Retro_gb.book Seite 26 Freitag, 23. Februar 2007 11:28 11