Filter
Top Products
DIRT CONTAINER & FILTER: REMOVAL & REPLACEMENT
HOW TO OPERATE: CONTINUED
7
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE REMOVING OR REPLACING
FILTER.
NOTE: For best performance, replace filter yearly.
Please use reminder label located on filter cap to record replacement date.
F1 5
FILTER TYPE
For F15 filter replacement, please visit our website at www.dirtdevil.com to buy
online or call customer service at 1-800-321-1134.
Lift dirt container
release button on top of
dirt container to remove
dirt container.
Hold the dirt container and grasp the top of the filter.
Pull the filter up and out (Diagram 4). Tap the filter on
the inside of a garbage can to remove excess dust and
dirt from filter. DO NOT APPLY WATER TO PLEATED
FILTER!
1.
Twist and lift to remove
dirt container lid.
3.
Hold dirt container over garbage can and
press clean release dirt container button
to empty. Make sure container bottom
center opening is clear of debris. Snap dirt
container bottom back into place after
emptying.
2.
2a.
4a.
4.
Grasp top of filter screen and lift out of dirt container
(Diagram 5). Tap screen on the inside of a garbage can
to remove dust and debris (Diagram 5a).
5a.
5.
FLOOR/CARPET CLEANING
1.
Move the handle and adjust
it to the desired position for
(a) operating the cleaner, and
(b) lowering handle to clean
under furniture.
a
b
CARRY HANDLE
1.
Use the carry handle
to move the cleaner
from room to room.
8
BELT OR BRUSHROLL: REMOVAL & REPLACEMENT
BELT STYLE
15
For Belt Style 15 replacements, please visit our website at www.dirtdevil.com to buy
online or call customer service at 1-800-321-1134.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING:TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE CHANGING BELT OR
BRUSHROLL.
Lay cleaner flat and flip cleaner to
expose nozzle base. Base should lay
flat and face up. To remove nozzle
guard, use Phillips screwdriver to
remove the six (6) screws. Arrows
show location of screws.
Lift and remove brushroll.
Dispose of old belt.
Flip cleaner right side up and lift
off nozzle guard.
2.
1.
3.
DIRT CONTAINER & FILTER REMOVAL & REPLACEMENT:
CONTINUED
Replace filter in dirt container (Diagram 7). Align tabs
on lid with the openings on the dirt container and
twist to close and secure lid (Diagram 7a).
7a.
7.
Insert screen back into
dirt container.
6.
Return dirt container to
cleaner.
8.
*Regular Maintenance: Each time the dirt container is emptied, the pleated filter should be cleaned. Tap the lid
firmly against the inside of a trash can until the dirt stops falling from the filter. (Filter will be discolored after use,
this will not affect the filter’s performance.) Do not brush the filter. The cleaning instructions may vary depending
on the dirt conditions. In some cases, more or less cleaning of the filter may be required. It is recommended that
the filter be replaced once per year.
TO REMOVE BELT