Filter
Top Products
BACK VIEWFRONT VIEW
FRONT VIEW
1. Handle Grip/Carry Handle
2. Stretch Hose
3. Crevice Tool
4. Tool Caddy
5. On/Off switch
6. Dirt Container Release Button
7. Filter
8.
Screen
9. Dirt Container
10. Nozzle
11. Bumper
12.
Dust Brush
BACK VIEW
13.
Hose Clip
14. Upper Cord Wrap with Quick
Cord Release
15.
Long power cord
16. Lower Hose/Clog Clean-out
17. Wheels
18. Lower cord wrap
19.
Cord Clip
5
FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
18
19
17
17
16
15
14
13
6
HOW TO ASSEMBLE
HOW TO OPERATE
Remove dirt container
from body of cleaner.
Slide handle into hole
on top of cleaner.
1.
2.
Insert screw through hole (located under
tool caddy) on back of cleaner (Diagram 3).
Place bolt onto end of screw coming
through back panel and tighten to secure
handle (Diagram 3a).
3.
3a.
Plug cord into electrical outlet.
T
urn c
leaner on by pressing the
on/off s
witch loca
ted on the top
of unit.
ON/OFF SWITCH
1.
HANDLE RELEASE
1.
Pull back handle to tilt back.
Press on the front of nozzle if
needed.
CORD RELEASE
T
urn the Quick
Cord Release for
easy cord removal.
Store cord in
cord guide (see
“F
ea
tures”,
Page
5 for loca
tion) to keep out of the
way while vacuuming.
1.
OFF
ON
TOOL REQUIRED: PHILLIPS OR FLAT HEAD SCREWDRIVER
FRONT
Attach crevice tool
and dust brush to tool
caddy.
Replace dirt container by tilting
back until it snaps into place.
5.
6.
Wrap hose around back of hose caddy
(Diagram 4). Push hose wand down into the
right side of cleaner (Diagram 4a).
4.
4a.
BACK
ATTACH HANDLE
SECURE BACK HOSE TOOL STORAGE INSTALL DIRT CONTAINER