Filter
Top Products
8 www.dimplex.com
To access the controls go to the
back of the Stove (Figure 1).
A. Three Position On/Off
Switch
The switch has two On positions
marked with “-” and “=”. The “-”
position is for manual operation.
In this position, the built-in remote
control is bypassed.
The “=” position is for operating
the unit with the provided remote
control. When in “=” position
the unit is operated with the ON
and OFF buttons of the remote
control.
When the switch is in the center
position the unit is off.
B. Heater On/Off Switch
The Heater On/Off Switch
supplies power to the heater fan
and the heater element.
C. Heater Thermostat Control
To adjust the temperature to
your individual requirements,
turn the thermostat control
clockwise all the way to turn
on the heater. When the room
reached the desired temperature,
turn the thermostat knob counter
clockwise until you hear a click.
Leave in this position to maintain
the room temperature at this
setting. For additional heat, turn
clockwise until you hear the click
again and the heater will turn on.
To turn the heater off, switch the
Heater On/Off Switch to the Off
position.
!
NOTE: When the heater is
switched On, the heater fan will
operate. The heater element may
or may not be on, depending on
the thermostat control setting.
Figure 1
A
B
C
Operation