Filter
Top Products
CAUTION
Do not exceed 25 watts per lamp.
To reassemble lamp area
1. Replace the glass and hold it in place at the top.
2. Fasten retaining clip to hold glass in place.
HELPFUL HINTS
It is a good idea to replace all light bulbs at one time if they are close to the end of their rated
life. Group replacement will reduce the number of times you need to open the unit to replace
light bulbs.
GLASS CLEANING
The glass is cleaned in the factory during the assembly operation. During shipment,
installation, handling, etc., the clear door may collect dust particles; these can be removed by
dusting lightly with a clean dry cloth.
To remove fingerprints or other marks, the clear door can be cleaned with a damp cloth. The
clear door should be completely dried with a lint free cloth to prevent water spots.
CAUTION
Do not use abrasive cleaners on glass surface or spray liquids directly onto any surface.
FIREPLACE SURFACE CLEANING
Use a cloth dampened with warm water only to clean painted surfaces of the electric fireplace.
Do not use abrasive cleaners.
11