QUICK REFERENCE GUIDE
1. Prior to the first use of the fireplace verify the
following:
· Are the circuit breakers for the unit
on?
· Are the light bulbs in your fireplace
loose?
(to check, follow the instructions for
replacing the light bulbs under the
maintenance section of this manual)
2. The heater on your fireplace may emit a
slight, harmless odor when first used. This
odor is a normal condition caused by the
initial heating of internal heater parts and will
not occur again.
3. The information regarding the model of your
fireplace can be found on the rating plate
located on the back of the unit.
4. If you have any technical questions or
concerns regarding the operation of your
fireplace, or require service contact customer
service at 1-888-346-7539 before returning
the product to the point of purchase.