Filter
Top Products
Digital Video Recorder User Manual
4.2.7 Network Configuration
Click NETWORK to enter Network Configuration shown as Fig 4.13 Network
Configuration.
Fig 4.13 Network Configuration
This unit supports DHCP, PPPoE, and DDNS. Users enable network function,
and configure IP address, DDNS, and transmission video parameters here. The
following are the explanation of each option.
HTTP port: The default is 80. If users change the value, they need to add the
port number when typing IP address in IE address blank. i.e. set HTTP port to 82,
IP address to 192.168.0.25. Users need input http://192.168.0.25:82 in IE
browser.
Server port: Communication port
DHCP: enable DHCP. For this feature work, you need to enable DHCP in the
router or virtual server. The unit will get IP address automatically from the router
instead of inputting IP, Subnet, and Gateway manually.
IP, Subnet, Gateway, DNS1 and 2: IP address information. If users do not
enable DHCP, it is necessary to input the value manually here.
PPPoE: Enable PPPoE. If users connect the DVR to internet directly by ADSL,
not through a router or a virtual server, please enable it.
User name, Password: Account information of PPPoE. Input what you get from
your ISP.
Click DDNS, a window will appear shown as Fig 4.14 DDNS Configuration.
The DVR currently supports DNS2P and 88IP. Users need to register at
www.dns2p.com or www.88IP.net, then input register ID and password here.
Click OK button. The unit will connect through DNS2P or 88IP domain name.
34