Digicom S.p.A.
VoiceGATE
Manual rev.2.0
Pag. 3
PREFACE
All rights reserved; no part of this publication may be reproduced, stored in a retrieval system,
or trasmitted in any form or by any means, electronic, otherwise, without the prior written
permission of Digicom S.p.A. The contents of this booklet may be modified without notice.
Every possible care has been taken in testing and putting together all the documentation
contained in this booklet, however Digicom can not take any responsability brought by the use
of this booklet.
The following installation rules should be respected in order to have the best working order of
the equipment and for the user’s safety.
ENVIROMENTAL CONDITIONS
ENVIROMENTAL TEMPERATURE from 0 to
45°C
RELATIVE HUMIDITY from 20 to 80% n.c.
Rapid changes of temperature or humidity should be avoided (0,03°C/min).
This equipment, including cables, should be installed in an area free from:
• Dust, humidity, heat from direct sun light.
• Objects which irradiate heat. These could cause damage to the container or other
problems.
• Objects which produce a strong electtromagnetic field (loudspeakers, etc.)
• Liquids or chemical corrosive substances.
CLEANING THE TERMINAL
Use a clean and soft cloth. Wet the cloth with water or natural detergent if it is necessary to
remove any stains. Never use chemical products such as petrol or solvents.
VIBRATIONS OR DROPPING
Caution against vibrations and dropping.
DECLARATION
OF CONFORMITY
Digicom S.p.A. via Alessandro Volta 39 21010 Cardano al Campo-Varese-
This product satisfies the basic requirements of the below indicated Directive:
• 1999/5/CE
• EN 55022
• EN 61000-3-2
• EN 55024
• EN 60950
• EN 41003