Filter
Top Products
Digicom S.p.A.
VoiceGATE
Manual rev.2.0
Pag. 19
RIP
The information concerning the reading and the parameters setup of the RIP protocol are displayed in this
window.
RIP:
Enables/Disables the RIP
Silent Mode:
OnlyRX – It manages the routing table in reception only
RX+TX – It manages the routing table also in transmission
Rip2 Mode:
Multicast – It indicates if the RIP packets must be sent to the
defined multicast address 224.0.0.9 (RIPv2)
Broadcast – It indicates if the RIP packets must be sent to the
interface broadcast address (RIPv1 compliant).
Timer Rate:
Time in seconds. It shows the updating time of the internal tables.
Supply Interval:
Time in seconds. It shows the forwarding time of the routing tables.
Expire Time:
Time in seconds. It shows the time after which a route is removed
from the routing table.
Garbage Time:
Time in seconds. It shows the time after which an expired route is
removed from the internal tables.