www.desatech.com
116292-01D
22
SPECIFICATIONS
LSL18NT, SL18NT and VSL18NT
• Natural Gas
• 9,000/18,000 Btu/Hr (Variable)
• Piezo or Electronic Ignition
• Pressure Regulator Setting - 3" W.C.
• Inlet Gas Pressure* (in. of water)
Maximum - 10.5" Minimum - 4"
• Heater Weight - 23 lbs. (10.4 kg)
Shipping Weight - 28 lbs. (12.7 kg)
*For purposes of input adjustment
LSL18PT, SL18PT and VSL18PT
• Propane/LP Gas
• 9,000/18,000 Btu/Hr (Variable)
• Piezo or Electronic Ignition
• Pressure Regulator Setting - 10" W.C.
• Inlet Gas Pressure* (in. of water)
Maximum - 14" Minimum - 11"
• Heater Weight - 23 lbs. (10.4 kg)
Shipping Weight - 28 lbs. (12.7 kg)
*For purposes of input adjustment
WIRING DIAGRAMS
CAUTION: Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and dangerous opera
-
tion. Verify proper operation after servicing.
Thermostat
Sensor Switch/
Interruptor de sensor
de temperatura
White/Blanco
Green/Verde
11
0/115
V.
A.C.
(V.C.A.)
Blower Motor/
Motor del
ventilador
Black/Negro
Black/
Negro
Thermostat
Sensor Switch/
Interruptor de sensor
de temperatura
N/O
* If any of the original wire as supplied with the appliance must be replaced,
it must be replaced with type 105°C wire or its equivalent.
* En caso que se deba reemplazar alguno de los cables suministrados
originalmente con el calentador, utilice únicamente cable tipo 105°C u otro equivalente.
Line/
Línea
Neutral/
Neutro
White/
Blanco
Green/
Verde
Motor
Black/
Negro
Black/
Negro
Wiring Diagram
Electrical Ladder Diagram