Filter
Top Products
www.desatech.com 113132-01A
32
ACCESSORIES
NOTICE: All accessories may
not be available for all fireplace
models.
Purchase these fireplace accessories from your lo-
cal dealer. If they can not supply these accessories,
call DESA Heating Products at 1-866-672-6040 for
information. You can also write to the address listed
on the back page of this manual.
EQUIPMENT SHUTOFF VALVE
GA5010
For all models. Equipment shutoff valve with 1/8"
NPT tap. Fits 1/2" NPT pipe.
BLOWER ACCESSORY - GA3750 &
GA3650T SERIES
For all models. Manual variable control and au-
tomatic thermostat variable control. A blower will
increase air flow to maximize heat distribution.
CORNER MANTEL
GM36F Series - Walnut Finished
GM37U Series - Unfinished
GM202F Series - Oak Finished
For all models. Shown with optional base and lami-
nate hearth and mantel trim accessories. Space sav-
ing corner mantels feature moldings, fluting and
medallion. Three-sided perimeter trim kit included.
Dimensions (H xW xD): 48
3
/4" x 60
7
/8" x 34
3
/4"
CABINET MANTEL
GMC11F Series - Walnut Finished
GMC12U Series - Unfinished
GMC13F Series - Oak Finished with
Medium Stain
GM102W Series - Off White Paint
For all models. Shown with optional base and
laminate hearth and mantel trim accessories. Man-
tel features moldings, fluting and medallion.
Three-sided perimeter trim kit included.
Dimensions (WxHxD): 48" x 56
3
/4" x 22
3
/4"
HARDWOOD HEARTH BASE
G3333F Series- Walnut Finished
G3334U Series - Unfinished
G3335F Series - Oak Finished with
Medium Stain
G3004W Series - Off White Paint
For all models. The hearth base can be used with
the cabinet mantels to create a handsome riser for
the fireplace (cannot be used with corner mantel).
Dimensions (WxHxD): 6
1
/2" x 58" x 28
9
/16"
CORNER HEARTH BASE
G3008F Series - Walnut Finished
G3009U Series - Unfinished
G3010F Series - Oak Finished
For all models. The corner hearth base is designed
for use with the corner mantels to create a hand-
some riser for the fireplace.
Dimensions (WxHxD): 6" x 52
1
/2" x 23
3
/4"