Filter
Top Products
www.desatech.com
116010-01C 11
OPTIONAL GAS LINE
INSTALLATION
Continued
and connections must be tested
for leaks after the installation
is completed. After ensuring
that the gas valve is on, apply
soap and water solution to all
forming show a leak. Correct
-
-
-
ate an unvented gas log set in
removed.
If you install a decorative gas appliance (vented
gas log), the decorative gas appliance must comply
with the Standard for Decorative Gas Appliance
for Installation in Solid Fuel Burning Fireplaces,
ANS Z21.60, Z21.84 or RG 2-72 and shall also be
installed in accordance with the National Fuel Gas
Code, ANSI 7223NFPA 54 latest edition.
Seal
Opening
with
Refractory
Cement
Outside of
Fireplace
Gas
Line
Conduit
Repack
Insulation
Incoming
1/2" Black
Iron Pipe
Side
Firebrick
Finished
Side
Provide Enough Threaded
End for Fitting Connection
Figure 19 - Gas Line Installation
has been used for wood burning,
cleaned of soot, creosote and
cleaner. Creosote will ignite if
heavily heated.
decorative vented gas log, the
damper must be removed or
permanently locked in the fully
open position and the glass
doors must be in the fully open
position.
GLASS DOOR
INSTALLATION
frame before installing glass
door.
1. Remove screws from smoke shelf (see
Figure 20).
2. Mount top door frame and secure with screws
removed in step 1.
3. Remove center brick by pulling ring handle
(see Figure 21, page 12).
4. Remove ash box.
Figure 20 - Installing Top Door Frame
Top Door
Rail
Smoke Shelf