Filter
Top Products
6
101047
WARNING ICON G 001
WARNING
Always have burner shield and screen in place before operating
heater. This prevents excessive temperatures on heater surfaces.
Figure 4 - Assembling Heater
Front Panel
Truss-Head Screw
Nut
Front Panel
Figure 5 - Attaching Brass Front Trim to Front Panel
Brass Front
Trim
ASSEMBLY
Continued
Log
Heater Cabinet
Deflector
Burner Shield
Screw
Screw
Brass
Front
Trim
Nut
Truss-
Head
Screw
Screen
Log
Retaining
Brackets
Attaching Brass Front Trim to Front Panel
1. Locate brass front trim in brass trim package.
2. Slide the head of two truss-head screws from hardware packet into each end of
brass front trim (see Figure 5).
3. Line up screws with holes in front panel (see Figure 4). Insert screws in holes.
Attach nuts from inside of front panel. Tighten with wrench.