4
101283
PRODUCT
IDENTIFICATION
THEORY OF
OPERATION
The Fuel System: The hose/regulator assembly attaches to the propane gas
supply. This provides fuel to the heater.
The Ignition System: The piezo ignitor lights the pilot fuel supply.
The Automatic Control System: The automatic control valve shuts off the
heater if the flame goes out.
1. Remove all packing items applied to heater for shipment. Keep plastic cover
caps (attached to inlet connector and hose/regulator assembly) for storage.
2. Remove all items from carton.
3. Check all items for shipping damage. If heater is damaged, promptly inform
dealer where you bought heater.
UNPACKING
Figure 1 - Product Identification
Shell
Automatic
Control Valve
Base
Note: Debris Shield Not
Shown
Piezo Ignitor
Button
Ignitor
Electrode
Pilot
Thermocouple
Inlet
Connector
Hose/Regulator
Assembly
Automatic
Control Valve
Button
Main Burner
Valve
Main Burner
Valve Handle
Top