Filter
Top Products
6
100165
PROPANE
SUPPLY
Propane gas and propane tank(s) are to be furnished by the user.
Use this heater only with a propane vapor withdrawal supply system.
The amount of propane gas ready for use from propane tanks varies. Two factors
decide this amount:
1. The amount of propane gas in tank(s)
2. The temperature of tank(s)
The chart below shows the number of 45-kg (100-pound) tanks needed to run this
heater. Do not operate this product with any tank smaller than 45-kg (100 pounds).
Less gas is vaporized at lower temperatures. You may need a larger tank in colder
weather. Your local propane gas dealer will help you select the proper supply
system.
INSTALLATION
Figure 3 - Regulator With Adjustment Knob Pointing Down
Propane
Tank
Supply
Valve
Hose
Regulator
Adjustment
Knob
(pointing down)
1. Provide propane supply system (see Propane Supply above).
2. Connect POL fitting on hose/regulator assembly to propane tank(s). Turn POL
fitting counterclockwise into threads on tank. Tighten firmly using
2,22 cm (7/8 in.) wrench.
IMPORTANT:
Tighten regulator with black adjust-
ment knob pointing down. Pointing adjustment knob down protects regulator
from weather damage.
POL Fitting
WARNING ICON G 001
WARNING
Test all gas piping and connections for leaks after installa-
tion or servicing. Never use an open flame to check for a
leak. Apply a mixture of liquid soap and water to all joints.
Bubbles forming show a leak. Correct all leaks at once.
WARNING ICON G 001
WARNING
Review and understand the warnings in the Safety Information
Section, page 3. They are needed to safely operate this heater.
Follow all local codes when using this heater.
4,5 °C 0 °C -6.2 °C -17.7 °C -23.3 °C -28.9 °C
(40 °˚F) (32 °F) (20 °F) (0 °F) (-10 °F) (-20 °F)
Number of tanks 3 (Use larger tank below 4,5°C [40°F])
Temperature °C (°F) At Tank