Filter
Top Products
3
103907
OWNER’S MANUAL
PRODUCT IDENTIFICATION
Figure 1 - 35,000 BTU/Hr Model
Power
Cord
Hose /Regulator
Assembly
Handle
Shell
Hot Air Outlet
(Front)
Fan Guard
Piezo Ignitor
Button
Automatic Control
Valve Button
UNPACKING
1. Remove all packing items applied to
heater for shipment. Keep plastic cover
caps (attached to inlet connector and
hose/regulator assembly) for storage.
2. Remove all items from carton.
3. Check all items for shipping damage.
If heater is damaged, promptly inform
dealer where you bought heater.
Motor
Heater Base
THEORY OF OPERATION
The Fuel System: The hose/regulator
assembly attaches to the propane gas sup-
ply. This provides fuel to the heater.
The Air System: The motor turns the fan.
The fan pushes air into and around the
combustion chamber. This air is heated and
provides a stream of clean, hot air.
Inlet
Connector
The Ignition System: The piezo ignitor
lights the burner.
The Automatic Control System: This
system causes the heater to shut down if the
flame goes out.