Filter
Top Products
3
103414
OWNER’S MANUAL
PRODUCT
IDENTIFICATION
Figure 1 - Log Base Assembly
Figure 2 - Fireplace
LOCAL CODES
Install and use fireplace with care. Follow all
local codes. In the absence of local codes, use
the latest edition of The National Fuel Gas
Code ANS Z223, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc
.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
UNPACKING
1. With utility knife, cut the carton all the
way around above the staples on the
bottom tray. Lift the carton off the fire-
box. Remove packing.
2. Locate two screws above top corners
of the fireplace screen. Remove and
discard these screws. Lift fireplace
screen up and pull out to remove.
3. Remove protective packaging applied to
logs, log base assembly, and fireplace.
4. Check all items for any shipping dam-
age. If damaged, promptly inform
dealer where you bought fireplace.
Top Louvered
Hood
Bottom Louver
Assembly
Screen Assembly
Top Outer
Casing
Firebox
Support
Rear Access Door
Base
Rear Burner
Front Log (#3)
Front Burner
Bottom Mid
Log (#2)
Top Log (#4)
Rear Log (#1)
Gas Regulator
CAUTION: Do not remove the
metal data plates from the grate
assembly. The data plates contain
important product information.