Filter
Top Products
www.desatech.com
113097-01E 29
4. The mounting clip must be a minimum of 3"
from bottom of replace to prevent crimping
of capillary. Once you have decided on a
location, clean the area thoroughly. Remove
the paper backing from the adhesive on back
of mounting clip. Press the clip into the new
location so that the thermostat sensing bulb
will be positioned vertically with the capil-
lary at the bottom (see Figure 44). Slide the
thermostat sensing bulb into the clip.
IMPORTANT: Do not crimp capillary.
Figure 44 - Positioning the Thermostat
Sensing Bulb in the Vertical Position
with the Capillary at the Bottom
Capillary
Thermostat
Sensing Bulb
Do Not Crimp
Capillary
Adhesive-backed
Mounting Clip
OPTIONAL POSITIONING
OF THERMOSTAT
SENSING BULB
Continued
SPECIFICATIONS
DUAL BURNER BILTMORE SpLIT OAK MODELS
Btu (Variable) 16,000/30,000 20,000/39,000 20,000/39,000
Type Gas Propane/LP Propane/LP Propane/LP
Ignition Piezo Piezo Piezo
Manifold Pressure 8.0" W.C. 8.0" W.C. 8.0" W.C.
Inlet Gas Pressure (in. of water)
Maximum 14" 14" 14"
Minimum* 11" 11" 11"
Shipping Weight 61 lbs. 66 lbs. 70 lbs.
* For the purpose of input adjustment
Btu (Variable) 16,000/30,000 20,000/39,000 20,000/39,000
Type Gas Natural Natural Natural
Ignition Piezo Piezo Piezo
Manifold Pressure 3.5" W.C. 3.5" W.C. 3.5" W.C.
Inlet Gas Pressure (in. of water)
Maximum 10.5" 10.5" 10.5"
Minimum* 5" 5" 5"
Shipping Weight 61 lbs. 66 lbs. 70 lbs.
* For the purpose of input adjustment
SINGLE BURNER SEASONAL OAK MODELS
Btu (Variable) 16,000/27,500 16,000/27,500 16,000/31,500 16,000/31,500
Type Gas Propane/LP Natural Propane/LP Natural
Ignition Piezo Piezo Piezo Piezo
Manifold Pressure 8.0" W.C. 3.5" W.C. 8.0" W.C. 3.5" W.C.
Inlet Gas Pressure (in. of water)
Maximum 14" 10.5" 14" 10.5"
Minimum* 11" 5" 11" 5"
Shipping Weight 49 lbs. 49 lbs. 53 lbs. 53 lbs.
* For the purpose of input adjustment