Filter
Top Products
12
SLEEP FUNCTION
This function is useful for the night as it gradually reduces operation of the
appliance and turns it off after 8 hours.
To set this function correctly:
• Select the operating mode (air conditioning, dehumidifying, smart or
heating (certain models only) as described above.
• Press the button. The appliance operates in the previously selected
mode with the lowest possible fan speed.
The SLEEP function maintains the room at optimum temperature without
excessive fluctuations in either temperature or humidity and with silent
operation.
Fan speed, room temperature and humidity vary gradually to ensure the
most comfortable conditions.
During air conditioning, the temperature increases by 2°F (1°C) after 60
minutes and a further 2°F (1°C) after 2 hours.
In dehumidifying mode, the dehumidifying power of the appliance is
partially reduced every hour for the first two hours.
In heating mode, the temperature drops by 2°F (1°C) every hour, for 3
hours. Ventilation will be in AUTO mode.
SELECTING THE TEMPERATURE SCALE
Press the button to switch the temperature scale from Centigrade
to Fahrenheit and vice-versa.
PROGRAMMING THE TIMER
The appliance can be programmed to start up and shut down when
desired.
Programming start up
• Press the button.
The start-up time and message ( ) flashes on the remote control
display.
• Press the or buttons to set the time you want the appliance to
start up.
• When that time is reached, press the OK button to confirm. The mes-
sage ( ) appears on the remote control display and the sym-
bol is displayed on the appliance to indicate that the timer is active.
Using the remote control