Filter
Top Products
3
signs overheating or deformations are evidenced by the plug. Do not use the
receptacle and CALL your electrician.
19. Check that neither the appliance nor the power cable have been damaged in any way
during transportation.
20.
CAUTION: to prevent electric shock match wide blade of plug to wide slot, fully insert.
21. Do not cover the appliance while it is functioning in order to avoid overheating with the
attendant risk of fire.
SAVE THESE INSTRUCTIONS
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
ELECTRIC CONNECTION
The fan heater must be connected to a properly polarized A/C 110/120 V household
outlet in perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from the wall outlet
where the heater is plugged in.
When you plug in the appliance, the red pilot light will illuminate (Fig. 1).
INSTALLATION
The fan heater can be easily positioned on any horizontal support surface in an upright
position.
FAN HEATER CONTROLS:
MANAUTO
O
°
F
AM
/
thermostat dial
Fig. 1
red pilot light
pointer
TIMER ON
yellow lamp
GB 10-05-2001 9:00 Pagina 3