Filter
Top Products
3
21. Make sure that no pieces of polystyrene or other packaging material have been left between one
element of the appliance and another. It may be necessary to pass over the appliance with a
vacuum cleaner.
22. When switching on the appliance for the first time, allow it to run at full power for
about two hours to get rid of the unpleasant smell Make sure that the room in which
the appliance is located is well ventilated during this operation. It is normal for the
appliance to emit small cracking sounds when you turn it on for the first time.
23. Do not cover the appliance while it is functioning in order to avoid overheating with the atten-
dant risk of fire.
SAVE THESE INSTRUCTIONS
For Household use only
HOW TO USE YOUR HEATER
"EASY WHEEL" SYSTEM
Turn the radiator upside-down on a rug or a soft surface in order to prevent damaging the paint finish. Fully
unfold the castors by turning them outwards (Fig. 1).
Turn the radiator back to its upright position.
LOCATION
Place the radiator on the floor beneath coldest window in the room or any desired location. Your heater will
minimize the effect of cold drafts. The heater must not be placed immediately below a power-outlet. Do not
use this radiator in rooms having a surface area of less than 43 square feet (4 sq.m.).
POWER CONNECTION
The radiator must be connected to a properly polarized A/C 110/120 V household outlet in perfect working
condition.
Keep loose clothing or bedding, furniture and flammable material away from the power outlet where the hea-
ter is plugged into.
Your product is equipped with a polarized alternating current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, con-
tact your electrician to replace your obsolete outlet.
Do not attempt to modify the plug to bypass this safety feature.
fig. 1