Filter
Top Products
5
Loosen the nut and
remove the sealing ring and inlet coupling
1
Replace the sealing ring
and screw in the elbow
Using a washer,attach
one end of the pipe
to the elbow
Place a washer
over the internal thread
and attach the other end
of the pipe to the
gas pressure regulator
2
3
4
Connecting the Gas bottle to the stove using a flexible pipe
AFTER CONNECTION CHECK FOR ANY GAS LEAKS
Open the gas regulator and using a paint brush, apply some soapy water to all the
couplings and connections.
The formation of bubbles will indicate a gas leak.
Leaking gas may also be identified by a characteristic smell.
If a leak is detected, do not attempt to light a burner.
Check and tighten all the connections once more. If a leak is still evident, turn the gas off
and call the nearest Defy Service Centre for assistance.
Connecting the Gas bottle to the stove using a plastic hose
Fit the hose over
the inlet coupling
Tighten the hose
clamp
Fit the other end of the hose
to the pressure regulator
and tighten the hose clamp
21 3
1 2 3
Connecting the Gas bottle to the stove using a flexible pipe