Filter
Top Products
7
TOGGLE SCREENS
Input Voltage
The Input Voltage screen displays the AC
voltage that the UPS system is receiving
from the utility wall receptacle. This can
be used as a diagnostic tool to identify
poor quality input power. Units are
listed in V (Volts).
Output Voltage
The Output Voltage screen measures, the
AC voltage that the UPS is providing to
your connected equipment via the UPS
outlets. Units are listed in V (Volts).
Output Frequency
The Output Frequency screen displays
the current frequency at which the UPS
is operating. Units are listed in Hz
(Hertz).
Estimated Runtime
The Estimated Runtime Screen displays
how many minutes of runtime can be
expected of the UPS if it were to
experience a power outage. Note: The
number displayed may be less than
actual runtimes for low loads.
Load Capacity
Similar to the Load/Current Level screen,
this displays the total load/current of the
connected equipment expressed as a
percentage (%).
Battery Capacity
The Battery Capacity screen displays the
battery’s current charge level and is
expressed as a percentage (%) of the
battery’s total capacity of 100%.
Temperature
The Temperature screen displays the
internal temperature of the UPS in
degrees Fahrenheit. Normal ranges are
32℉-104 . If the temperature exceeds ℉
104 , additional methods should be ℉
implemented to cool the UPS (i.e. air
conditioning, additional ventilation,
isolation from other heat producing
equipment, etc.)
Temperature
The Temperature screen displays the
internal temperature of the UPS in
degrees Centigrade. Normal ranges are
0℃-40 . If the temperature exceeds ℃
40 , additional methods should be ℃
implemented to cool the UPS (i.e. air
conditioning, additional ventilation,
isolation from other heat producing
equipment, etc.).
DEFINITION FRO ILLUMINATED LCD INDICATORS