Filter
Top Products
Support Brackets:
For finished ceilings or where
additional support is required, based
on garage construction.
Includes brackets and fastening
hardware.
38
Accessories Available For Your Opener
LOCK
LIGHT
139.53684
139.53687
139.53681
139.53703
53589
139.53686
139.53702
SECURITY✚ Compact 3-Function
Remote Control:
With loop for attaching key ring.
SECURITY✚ 3-Function Remote
Control:
Includes visor clip.
Outdoor Key Switch:
Operates the garage door
automatically from outside when
remote control is not handy.
Door Clearance Brackets:
(For Sectional Doors Only)
Replaces top brackets and rollers on
door to reduce height of door travel.
For use when installing opener in
garage with low headroom clearance.
Plug-In Light Control:
Enables homeowner to turn on a
lamp, television or other appliance
from car, bedside, or anywhere in the
home with a remote.
Premium Control Console:
Provides a lock feature to prevent
operation of garage door from portable
remotes. A light feature controls the
opener lights. Can be used to program
the opener to accept additional remotes.
Emergency Key Release:
Required for a garage with NO access
door. Enables homeowner to open
garage door manually from outside by
disengaging trolley.
8 Foot Rail Extension
To allow an 8 foot door to open fully.
139.53404
139.53709
Extension Brackets:
(Availale only through Sears Parts &
Service)
(Optional) For safety sensor
installation onto the wall or floor.
41A5281
139.53680
We recommend that you program your password before
you install the Keyless Entry. You will not need
assistance, and you can test the reception at the
mounting location before installation.
If you have a Premium Control Console:
1. With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener light flashes, release all buttons.
If you do not have a Premium Control Console:
1. Choose a 4-digit password using numbers from 0 to 9 (a
number can be used more than once, for example, 4, 0,
4, 1).
2. Press the four buttons for the password, then press and
hold the Enter button. The indicator light on the door
opener panel will blink.
3. Press and release the SRT (learn) button on the opener
panel. After the opener light flashes, release the Enter
button.
Test by pressing the password, then press Enter. The door
should begin to move.
To Add the Keyless Entry
SECURITY✚ Keyless Entry:
Enables homeowner to operate garage
door opener from outside by entering
a password. Also can add a temporary
password for visitors or service
persons. This temporary password
can be limited to a programmable
number of hours or entries.