Filter
Top Products
Hanging Vac on Storage Rack
1.Set the vac on the floor near the stor-
age rack. Measure the distance from
center of storage rack to the closest
electrical outlet and add 18 inches.
_1 DOutlet_
istance __
Inches
2, Uncoil that amount of power cord from
the cord wrap. Drape the loose cord
over the top of the vacuum and down
the front.
3. Grasp the handle with one hand and
the bottom of the vsc canister at the
front foot with the other hand. Always
lift the vac with both hands. Lift the vac
up to the storage rack.
4. Align the upper hook on the vac with
the rectangular opening in the storage
rack. Push the vac against the storage
rack.
_Rectangular
_1 /Opening
__ Upper Hook
Storage
Rack
Retan,
Opening in
Storage
Rack
Release Tab
Mac
Hook
Push Vac
Against
Storage
Rack
Vac
Canister
5. Lower the vsc until the upper vsc hook
and lower hook are engaged and the
bottom of the vac canister rests on the
rack. The release tab will pop out over
top of vac.
_ Release Tab
Upper HI
Lower I I I
Vac Hook_
6. Snap the power cord into the cord
retainers in the front surface of the rack
and loop around the keeper behind the
wand storage area. The cord may exit
on either the left or right side. Plug the
power cord into the electrical outlet. Do
not fasten power cord to wall in any
way,