Filter
Top Products
Clean 'N Carry Vac Assembly
Vac Assembly
1, Wind the electdcal cord clockwise
(from the rear) around the cord wrap
area on back ofvac motor assembly.
Cord
Wrap
Cord Area
3. Place vac motor assembly onto vac
canister assembly.
Vac Motor
Assembly
2. Position the vac canister lock in the
unlock position.
VacMotor\ J
Assembly_ VacCanister
Lock
Vac
Canister
4. Turn vac canister lock into locked posi-
tion.
NOTE: There is a detent at the end of
travel in both the locked and unlocked
position. Continue to turn knob until it
"clicks" into the desired position.
You should feel and hear the "click".
Assembly Vac
Canister
Lock