Filter
Top Products
Operation
Your Craftsman two-gallon wet/dry vac is
assembled at the factory and ready for use
when you remove it from the carton. The
unit is ready for dry vacuuming or blowing.
After you plug the power cord into the wall
receptacle, turn the unit “ON” by pushing
the switch from position “O” to position
“I”. The symbols used on the switch are
international symbols. The “O” is the
“OFF” position and the “I” is the “ON”
position.
7
WARNING
To reduce the risk of fire or explosion, do not operate this vac in areas with
flammable gases, vapors or explosive dust in the air. Flammable gases or
vapors include but are not limited to: lighter fluid, solvent type cleaners, oil-
base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but
are not limited to: coal, magnesium, aluminum, grain or gun powder. Do not
vacuum explosive dust, flammable or combustible liquids or hot ashes. Do not
use this vac as a sprayer for any flammable or combustible liquid. To reduce
the risk of health hazards from vapors or dusts, do not vacuum toxic
materials.
"O" - "OFF"
Position
"I" - "ON"
Position
=
OFF
=
ON
CAUTION: To reduce risk of hearing
damage, wear ear protectors when
using the vac for extended hours or
when using it in a noisy area.
WARNING: The operation of any
utility vac can result in foreign
objects being blown into the eyes,
which can result in severe eye
damage. Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
starting operation. Safety eyewear is
avail-able at many local retail stores.
SP6523-3.qxd 11/13/06 8:15 PM Page 7