Filter
Top Products
Safety Information
Operating Instructions Troubleshooting Tips Customer Service
01
02
07
08
NAMES OF EACH PART
Front/Rear
Installation Accessory
Indication Parts
Indication Part
Power Cord
Inlet (Orange Color)
Outlet (Blue Color)
Indicator of Water Extraction
The light blinks when filtered water comes out through the faucet
and the light goes out when you’re not using filtered water.
Indicator of flushing
The light indicating “wash” blinks in the event of filter cleansing by
flushing. The blinking stops when the cleansing is over, and the
light goes out. If the filter is in use for a period of more than four
minutes, the filter can be protected by auto flushing, which starts
when the filter no longer has water passing through it.
Additionally, if the unit has not been used in more than 24 hours,
auto flushing for 30 seconds automatically occurs.
Indicator of Water Shortage
The light blinks for 10 seconds as soon as the feed water supply
is inadequate, or is interrupted. If you see the blinking light, please
check the quantity of inflow or the feed valve for the feed water.
Indicator of Filter Replacement
The light saying “Filter” lights up when a filter replacement is
needed.
:
Neo-Sense filter
:
RO Membrane filter
: Fine
Post-Carbon filter
Restart Button
Extraction Fitting
Outlet Cap
※Check fitting and tubings are the parts that can be replaced.
Brief User’s
Manual
User’s Manual
a book
Fitting Anchor
Tubing 1/4” 2m 1ea(Blue)
Tubing 3/8” 2m 1ea(Orange)
Tubing 1/4” 2m 1ea
(Orange)
Adapter
Reducer Fitting
3/8” +1/4 1ea
Fitting 3/8” 1ea
Then, connect the faucet with the adaptor.