Coway BA13-AE Plumbing Product User Manual


  Open as PDF
of 28
 
11
CHECK BEFORE USING YOUR PRODUCT
Selecting/cancelling silent mode
1. Press and hold down the ‘Power’ and ‘Rear Cleansing’ buttons
simultaneously for at least 1 second when the power cord is plugged into
the electrical outlet (an alarm sound is generated).
2. Set the mode by pressing the ‘Power’ button on the operation part.
-Ifthepowerindicatoristurnedonthisindicatesthatsilentmodehasbeenset.
-Ifthepowerindicatoristurnedoff,thisindicatesthatsilentmodehasbeen
canceled.
3. After setting silent mode, and pressing the ‘Power’ and ‘Rear Cleansing’
buttons simultaneously or no button is pressed for 10 seconds, the
setting is saved and the bidet changes to the standby state (an alarm
sound is generated).
Conguring a special mode
Selecting/cancelling seat sensor lock mode
1. Press and hold down the ‘Power’ and ‘Rear Cleansing’ buttons
simultaneously for at least 1 second when the power cord is plugged into
the electrical outlet (an alarm sound is generated).
2. Set the mode by pressing the ‘Nozzle Cleaning’ button on the operation
part.
-Iftheseattemp.indicatoristurnedon,thisindicatesthatseatsensorlock
mode has been set.
-Iftheseattemp.indicatoristurnedoff,thisindicatesthatseatsensorlock
mode has been canceled.
3. After setting seat sensor lock mode, and pressing the ‘Power’ and
‘Rear Cleansing’ buttons simultaneously or no button is pressed for 10
seconds, the setting is saved and the bidet changes to the standby state
(an alarm sound is generated).
Selecting/cancelling bidet eco mode
1. Press and hold down the ‘Power’ and ‘Rear Cleansing’ buttons
simultaneously for at least 1 second when the power cord is plugged into
the electrical outlet (an alarm sound is generated).
2. Set the mode by pressing the ‘Rear Cleansing’ button on the operation
part.
-Iftheecomodeindicatoristurnedon,thisindicatesthatbidetecomodehas
been set.
-Iftheecomodeindicatoristurnedoff,thisindicatesthatbidetecomodehas
been canceled.
3. After selecting bidet eco mode, and you press the ‘Power’ and ‘Rear
Cleansing’ buttons simultaneously or no button is pressed for 10
seconds, the setting is saved and the bidet changes to the standby state
(an alarm sound is generated).
1210964 BA13 사용설명서_수출영문_(09.03.23).indd 11 2009.3.24 10:13:13 AM
 previous next