Coway BA08-AR Plumbing Product User Manual


 
26
CLEANING METHOD
Uninstallation the product
1. Unplug the power plug from the outlet.
2. Close the main water supply valve.
3. Place a big wash basin (1 L or more) under the rear
drain hole of the bidet.
4. Turn the drain stopper to
1
counter clockwise by 90 °
and pull out it in the direction of
2
to remove it.
- Pleaseassemblethedrainstoppertotheproductagainafter
draining.
5. Please separate the product by removing the xing
nuts in the xing screw and lifting the bidet.
- Pleasepulloutthepowerplugandseparatethebidethosefrom
T-shapedconnectorbeforeseparatingtheproduct.
- Whenstoringtheproduct,separatethelterxedstopperandMF
lterfromthebidetandstorethemwithinstallationmaterials.
- Exercisecautionnottolosexingscrewsandxingnuts.
Whenyoudon’tusetheproductforalongtime,unplugafterturningothemainwater
supplyvalveandemptyingthewaterinsidethewatertank.
Tips
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 26 2009.6.10 6:17:3 PM