Coway BA08-AR Plumbing Product User Manual


 
25
Maintenance
INSTALLATION
|
Installation the Remote Control Mount / CLEANING METHOD
|
Nozzles
|
Product Body
CLEANING METHOD
Nozzles
1. Press nozzle cleaning button on the right side of the
bidet.
Thenozzlecleaningwaterissprayedandthefrontcleansingnozzle
sticksouttoitsfulllength.
Cleanthefrontcleansingnozzle.
2. Press nozzle cleaning button one more.
- Thenozzlecleaningwaterissprayedandthefrontcleansing
nozzleretractsitself,andtherearcleansingnozzlesticksouttoits
fulllength.
- Cleantherearcleansingnozzle.
3. If you press the stop button on the remote control
or nozzle cleaning button on the product once more
after cleaning the rear cleansing nozzle, the nozzle
cleaning water is sprayed and the rear cleansing
nozzle retracts itself.
- Ifnobuttonispressedfor2minutesafterthenozzlecleaning
starts,thenozzleretractsitselfautomatically.
Product body
Apply the neutral detergent to a soft cloth or sponge
and clean the product.
Ifyouusethedetergentexceptfortheneutraldetergent,the
productdeformationandthedamagemaybeoccurred.
Ifexcessiveforceisexertedonthenozzlewhencleaningit,thenozzlemaynotbe
workingproperlyorbebroken.Holdthenozzlelightlytocleanit.
Whenyoucleanthenozzle,thenozzlecleaningwaterissprayed(Butthenozzle
cleaningwaterdoesn’tbesprayedandonlynozzleisextendedinthefeedwater
stopstatus).
Tips
Donotusethinner,orbenzene.Donotcleantheproductusingcoarsescrubor
detergentwithabrasives.
Tips
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 25 2009.6.10 6:17:3 PM