Filter
Top Products
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.
Trunion Luminaire Vent Plug: (Illustration 5 and 6)
NOTE: When gound mounting a trunion luminaire NOTE: When overhead mounting a trunnion
this vent plug must be removed luminaire this vent plug must be removed.
NOTE: DO NOT REMOVE ANY VENT PLUG FROM A KNUCKLE LUMINAIRE.
AIMING: (Illustration 7 and 8)
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269 IMI-623 ACF050370
Small falcon
Sheet 4 of 7
1/26/05 IMI-623
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING LUMINAIRE.
RETAIN FOR FUTURE REFERENCE.
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing
or servicing.
ILLUSTRATION 5
ILLUSTRATION 6
To aim knuckle
luminaire --loosen
screw, rotate
luminaire to
desired aiming
and securly
tighen screw
To aim trunnion
luminaire
--loosen four
bolts, rotate
luminaire to
desired aiming
and securely
tighten four
bolts
KNUCKLE AIMING
ILLUSTRATION 7
TRUNION AIMING
ILLUSTRATION 8
CAUTION: Failure to remove the proper trunnion luminaire vent plug as illustrated above may result in water entry causing
damage to internal electrical components.
Remove
Vent Plug
Remove
Vent Plug
To aim knuckle
luminaire -
loosen screw,
rotate luminaire
to desired aiming
and securly tight-
en screw.
To aim trunion
luminaire - loosen
four bolts, rotate
luminaire to
desired aiming
and securely
tighten four bolts.