Filter
Top Products
6
ENGLISH
Continuous
Override Mode
(standard flood-
light setting)
Lights should stay
on continuously
both day and night
(must be reset
manually).
TEST
Turn the power
“OFF”
for 5 seconds then
back “ON.”
2 times
Return to Auto
or NIGHT TIME
ON Settings
(motion
activated)
From any of the
above settings.
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME
ON MODES
Turn the power
“OFF”
for at least 90
sec., then
back “ON.”
1 time
Dusk to Dawn
Setting
Override Mode
(activated only
at night)
Lights should stay
on 100% bright-
ness from dusk to
dawn and then
reset to the AUTO
or NIGHT TIME
ON setting next
dawn.
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME
ON MODES
Turn the power
“OFF”
for 5 seconds then
back “ON.”
2 times
6 Hour
NIGHT TIME ON
then Motion
Activated
Lights should turn
on automatically at
night 100% bright-
ness for 6 hours,
then reset to regu-
lar auto motion
setting for the
remainder of the
evening.
NIGHT TIME ON
6 HR
(6 Hours)
Note: Once the light has
come on in the selected
“Night Time On “ mode, you
cannot change the mode
setting until the next dawn.
The light will operate in the
first “Night Time On” mode
selected (2 hour, 4 hour, or
6 hour), even if changed.
Keep the power to
the fixture on.
1 time
Mode of
operation:
Set slide switch
on sensor to:
How to set
power switch:
How many times
LED will blink:
SV278/SV278W I.S. 10/21/03 11:12 AM Page 6