Filter
Top Products
8
Change Heating and Cooling System Mode
The Wireless Thermostat allows you to select the mode of operation for the climate control system. Using modes
can help with efficiency.
Modes include:
• Off. When in the Off state, the Wireless Thermostat does not make any requests to the heating or cooling
system.
• Heat mode. During cold winter months, if you do not want to run your air conditioning system, set the Wire-
less
Thermostat mode to Heat. The system then uses the furnace exclusively.
• Cool mode. During hot summer months, if you do not want to run your furnace, set the Wireless Thermostat
mode to Cool. The system then uses the cooling system exclusively.
• Auto. During spring and fall when your home might needs to be warmed at times or cooled at other times,
set the
Wireless Thermostat mode to Auto to automatically switch between heating and cooling based on the
desired set points.
To change the Thermostat Mode using one of the navigation control options, see the following sections:
• Change Thermostat Mode using Wireless Thermostat. See next section.
• Change Thermostat Mode using Navigation Device or Display. See page 9.
• Change Thermostat Mode using System Remote Control LCD. See page 10.
• Change Thermostat Mode using LCD Keypad. See page 10.
Change Thermostat Mode using Wireless Thermostat
1 Press Button 1 repeatedly until the desired mode appears (Off, Heat,
Cool, or Auto). The desired mode change is immediately reflected.
2 Leave it on the desired mode when it appears.