Filter
Top Products
8
PYROMASTER® UVHB20 Vent-Free Heaters
20001540
Log Installation
1. Remove logs from packaging.
As with all plastic - these are not toys
and should be kept away from children
and infants.
2. Place rear log on rear bracket (ensure log is seated
properly, leveled and centered to the unit), so it will
not move from side to side and is firmly positioned
on the bracket.
3. Place front log behind the front burner on top of the
front log support. Make sure the log is centered to
the burner.
4. Place top left log onto locator notches. Ensure log
is secure.
5. Place top right log onto locator notches. Ensure log
is secure.
6. Once the unit is lit, check that the flame does not
impinge or touch the logs. If impingement does
occur, adjust logs slightly until flames do not touch
the logs.
Rock Placement
Spread the volcanic rock (gravel size) on the burner
pan of the fireplace. This will give the fireplace a
realistic look.
Under no circumstances should this
lava rock be placed on any part of the
burner tube.
Ember Placement
Separate the ember material into small pieces and
place onto the grill in front of the front burner. Do NOT
pack down, leave in fluffy, loose condition for most
realistic ember effects. Do not install more embers
on the burner than come with the unit.
Fig. 8 Log placement.
LG110
Top Left Log
Top Right Log
Rear
Log
Ember
Material
Front Log