CFM UV36 Indoor Fireplace User Manual


 
Vent-Free Gas Fireboxes
Model: UV36
78647
ADC36-3 cover
2/04
Homeowner’s Installation and
Operating Instructions
CFM Corporation Unvented Gas Logs VL24MN,
VL24MP, VL24RN, VL24RP, VFL34MN,
VFL34MP, VFL34RN, VFL34RP may be used
with this firebox.
(Refer to Page 4)
20007446 10/06 Rev. 5
INSTALLER/CONSUMER
SAFETY INFORMATION
Read and save
these instructions.
This book contains your installation instructions
and should be kept in a safe place. For you to
realize all the advantages and use of the reliable
service that has been engineered into your fire-
place, you must carefully follow all of the instruc-
tions contained in this book regarding installation
and operation of the fireplace.
These instructions should be read carefully in
their entirety before beginning installation of the
fireplace.
It is suggested that you wear work gloves and
safety glasses to protect your hands and eyes
when installing your fireplace. NOTE: Authorities
having jurisdiction (i.e. building inspectors, fire
marshals, etc.) should be consulted before instal-
lation to determine the need to obtain a permit.
When installing the Blower Kit, it is necessary to
bring the power source to the fireplace before
walls are enclosed. Refer to Blower Kit instruc-
tions.
These fireboxes are approved as universal
fireboxes and can be paired with any ANSI
Z21.11.2 approved vent-free log set. The vent-
free log manufacturer’s instructions - includ-
ing their required dimensional clearances for
firebox size, - must be followed.
Refer to the manual that is packed with the log
set for operating instructions.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.