Filter
Top Products
13
102664
7. Carefully place fireplace on top of hearth base (Figure 11). Be careful not to
scratch or damage hearth base.
Note:
You can secure fireplace to hearth or
floor. Open lower louver. Locate screw holes in bottom of base. Secure with
wood screws through these holes and into hearth or floor.
8. Connect fireplace to gas supply (see page 17).
9. Check all gas connections for leaks. See Checking Gas Connections, page 18.
10. After heater is secured, replace mantel on hearth base (see Figure 10). Make
sure mantel is flush against wall. Install brass trim (see page 10).
Continued
Figure 11 - Inserting Fireplace Into Cabinet Mantel
Figure 10 - Installing Cabinet Mantel
Cabinet Mantel