Filter
Top Products
CLARKE TECHNOLOGY Operator's Manual - Encore L26 Cylindrical Page -5-
SPECIFICATIONS:
Model Encore L26 Cylindrical
Machine Power Supply 24 Volt D.C.,
(4) 6V 250 AH Deep Cycle Batteries or
(4) 6V 330 AH Deep Cycle Batteries
Pad or Brush 26" Cylindrical
2 per machine
Traverse 0.5 hp (0.4 kW) Transaxle
Traverse Forward Speed Variable to 250 ft./min (76 m/min)
Traverse Reverse Speed Variable to 190 ft./min. (58 m/min)
Battery Protection Low Voltage
Motor Vacuum 3/4 HP, 3 stage, Acoustical High Efficient Tangential
Solution Tank 20 Gallons (76 liters)
Solution Level Calibrated level indicator on rear of machine
Recovery Tank 20 Gallons (76 liters)
Recovery Full Indicator Electric Shut-Off
Parabolic Squeegee Swing type with breakaway feature, No tool operation feature
32 inches (81 cm) hard width with 34 inches (86 cm) flex blade width.
Squeegee Operation Reverse direction on floor and 3 - position manual lever style operation
Cleaning Swath 26 inch ( 66 cm)
Motor, Brush (2) 0.75 HP (0,56 kW)
Brush / Pad Size (2) 4 inch (10 cm)
Brush Speed 1000 RPM
Brush Pressure 0-100 lbs. / 0-45 kg.
Brush Solution Retention Fiber Bristles
Drive Wheels (2) 8 in. x 2 in. (20 cm x 5 cm) Neoprene tread
Caster Dual 4 in. x 2 in. (10 cm x 5 cm)
Charger 24 V D.C., 25 Amp, 115/60 or 24 V D.C., 25 Amp, 230/50
Grade Cleaning 5 Degree (6%)
Length 56 inches (142 cm)
Width 28 inches (71 cm)
Height 43 inches (109 cm)
Weight 871 lb / 395 kg
Line of Sigh (from Operator
Height): 68 inches (173 cm) 7.5 feet (2.3 m)
Warranty Machine 3 Years, Polydur tanks- 8 years
Batteries- 18 months, pro-rated
Noise 71 dBA
Vibration < 2.5 m/s
2
Introduction & Machine Specifications
Introduction & Machine Specifications
Clarke Technology’s newly designed Encore L26 Cylindrical automatic scrubber is an efficient and
superior floor cleaning machine. The Encore uses two brushes to scrub and sweep a path 26 inches
wide. A squeegee wipes the floor while the vacuum motor removes the dirty solution from the floor - all in
one pass.
The Encore L26 Cylindrical comes complete with four - 6 volt batteries, one battery charger, two brushes
and one operator’s manual.