Cisco Systems 3530 Home Security System User Manual


 
2-10
Cisco Video Surveillance 3530 IP Camera Installation Guide
OL-28689-01
Chapter 2 Camera Installation
Installing the IP Camera with a Vandal Resistant Enclosure
Step 15 Use the included wrench and tighten the four dome cover screws to secure the dome cover to the camera.
Make sure all parts of the camera are securely installed.
What to do next
After you install the IP camera, follow the instructions in the “Performing the Initial Setup of the IP
Camera” section on page 3-1 to access the IP camera through your network.