Filter
Top Products
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 PAGE 4
Store idle equipment out of reach of children and other untrained persons. 2.
Electrically-powered products are dangerous in the hands of untrained users.
Check for misalignment or binding of moving parts, breakage of parts, and 3.
any other condition that may affect this product’s operation. If damaged,
have the Sump Pump serviced before using. Many accidents are caused by
poorly maintained equipment.
SERVICE
Service must be performed only by qualied repair personnel. 1. Service or
maintenance performed by unqualied personnel could result in a risk of injury.
When servicing this product, use only identical replacement parts. Follow 2.
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the Pump.1. These carry important informa-
tion. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2. Wear ANSI-approved safety impact eye goggles when assembling
the Pump. Using personal safety devices reduce the risk for injury.
Safety impact eye goggles are available from Harbor Freight Tools.
Use the right product for the job. 3. There are certain applications for which this
product was designed. Do not use small tools, attachments, or equipment to do
the work of larger industrial tools, attachments, or equipment.
Maintain a safe environment. 4. Keep the area well lit. Make sure there is ad-
equate surrounding space. Always keep the area free of obstructions, grease, oil,
trash, and other debris. Do not use an electrically powered product in areas near
ammable chemicals, dusts, and vapors.
5. Risk of electrical shock. Always disconnect the Pump from its power
source before handling or making any adjustments to the tool. Always
wear non-skid rubber boots when water is on the oor and you must
unplug the Pump. Make sure the electrical power source is a separate-
ly fused, grounded, 3-wire type GFCI (Ground Fault Circuit Interrupter) outlet. Do
not remove the ground prong on the Power Cord Plug. Do not use an exten-
sion cord.
Do not pump hazardous materials. 6. Do not pump explosive or ammable ma-
terials such as fuel, oil, kerosene, gasoline, etc. Do not pump in close proximity
to ammable or explosive materials. Do not pump fats, oils, salt or waste water.